Huntsville Concrete Pumping

Boom Pumps, matched to a local operator.

A boom pump is a truck with a hydraulic arm that places concrete over, around, and far past whatever is in the way. If your pour is set back from the street, up a level, over a house or a fence, or just too far for hose on the ground, this is the machine that does it.

  • One request, one local operator
  • Real quote with minimums and terms up front
  • No cost to request

Best for

  • House slabs set back from the road
  • Commercial and warehouse slabs
  • Walls and elevated pours
  • Footings behind existing structures
  • Big yardage where placement speed matters

Know before you book

A boom needs room to set up: outriggers out, overhead clear of lines and trees, and firm ground under the truck. It also carries the higher rate of the two pump types. If your pour is close to the street on flat ground, a line pump will usually quote lower for the same concrete.

How boom pumps pricing works

Boom work is priced on time plus yardage in most markets: an hourly rate for the truck and operator, a per yard charge for what goes through it, and a minimum that covers showing up. Bigger booms and longer travel both raise the rate, which is why an accurate reach estimate in your request makes the quote tighter.

The full rate tables for Huntsville and Madison County are in the cost guide, including the factors that push a quote up or down and worked examples with real math.

Typical pricing

Boom pump

  • Hourly$200 to $255/hr
  • Per yard pumped$4.00 to $4.50/yd
  • Typical minimum job$800 to $1,300+

Line pump

  • Hourlyabout $160/hr
  • Per yard pumpedabout $4.50/yd
  • Typical minimum jobabout $600

Ballpark ranges from published 2025 to 2026 US rate guides. Pump size, yardage, distance, and schedule move the real number. The operator confirms the final price before anything is booked.

Boom Pumps questions

How far can a boom pump reach?

Boom pumps come in size classes, and the larger trucks place concrete well over 100 feet from the setup spot, horizontally and vertically. Tell the operator your farthest point from where a truck can park and he will send the size that covers it, not the biggest truck on the yard.

What does the site need for a boom pump?

A firm, fairly level setup area, outrigger room on both sides, overhead clearance for the boom to unfold, and a washout spot. Power lines change the plan entirely, so mention them in the request if they are anywhere near the setup.

Is a boom pump faster than a line pump?

For placement, yes. A boom moves concrete at a higher rate and the crew is not dragging hose. On a big slab that speed is real money in labor. On a small patio it does not matter, and you would be paying for reach you do not use.

How much does boom pump work cost here?

Most Huntsville area boom pump jobs start between $800 and $1,300 for the minimum, then run $200 to $255 per hour plus $4.00 to $4.50 per yard pumped. Line pump jobs start around $600, at about $160 per hour plus about $4.50 per yard. Your quote depends on pump size, yardage, and how far the truck travels.

What does this service cost me?

Nothing. You pay the operator for the pumping work at the price they quote you. This site is a quote and matching service, and your request goes to one local operator, not a lead auction.

Who actually does the pumping?

An independent local operator, not this website. We route your request and they quote, schedule, and perform the work under their own terms, licenses, and insurance.

Related services and cities

Line Pumps

A line pump is a trailer pump that pushes concrete through hose laid on the ground. It goes where trucks canno...

Request a pumping quote

Need boom pumps? Tell us about the pour once and a local operator will price it and confirm the schedule.

  • No cost, no obligation
  • Your details go to one local operator, not a lead auction
  • Residential and commercial pours welcome

Get a free quote