Huntsville Concrete Pumping

Line Pumps, matched to a local operator.

A line pump is a trailer pump that pushes concrete through hose laid on the ground. It goes where trucks cannot: through gates, along side yards, into backyards and interiors. For ground level pours with tight access, it is usually the right tool and the lower quote.

  • One request, one local operator
  • Real quote with minimums and terms up front
  • No cost to request

Best for

  • Backyard patios and pool decks
  • Driveways and sidewalks
  • Interior slabs and additions
  • Footings in tight lots
  • Any pour a gate or fence stands in front of

Know before you book

Hose has limits. Very long runs, steep uphill pushes, and stiff mixes all work a line pump harder, and the crew handles hose by hand, so placement is slower than a boom. If your run is extremely long or the pour is elevated, the operator may steer you to a boom and will tell you why.

How line pumps pricing works

Line pump work is typically an hourly rate plus a per yard charge, with a lower minimum than a boom. Hose length beyond the standard setup can add cost, so measure your run from the street to the far edge of the pour before you request a quote.

The full rate tables for Huntsville and Madison County are in the cost guide, including the factors that push a quote up or down and worked examples with real math.

Typical pricing

Boom pump

  • Hourly$200 to $255/hr
  • Per yard pumped$4.00 to $4.50/yd
  • Typical minimum job$800 to $1,300+

Line pump

  • Hourlyabout $160/hr
  • Per yard pumpedabout $4.50/yd
  • Typical minimum jobabout $600

Ballpark ranges from published 2025 to 2026 US rate guides. Pump size, yardage, distance, and schedule move the real number. The operator confirms the final price before anything is booked.

Line Pumps questions

How much hose does a line pump carry?

Operators carry enough hose for typical residential runs, commonly a few hundred feet of line on the trailer. If your pour is unusually far from the street, put the distance in the request so extra hose comes on the truck the first time.

Will the hose damage my yard or driveway?

Hose sits on the ground and the crew routes it around landscaping when you point out what matters. It is far gentler than driving a mixer across a yard. Mention sprinkler lines, septic, and drains so the route avoids them.

What mix does a line pump need?

Line pumps want a pumpable mix, usually a smaller aggregate and the right slump, ordered as a pump mix from your ready-mix supplier. Tell the supplier a pump is on the job when you order. The operator will confirm the mix on the quote call.

How much does line pump work cost here?

Most Huntsville area boom pump jobs start between $800 and $1,300 for the minimum, then run $200 to $255 per hour plus $4.00 to $4.50 per yard pumped. Line pump jobs start around $600, at about $160 per hour plus about $4.50 per yard. Your quote depends on pump size, yardage, and how far the truck travels.

What does this service cost me?

Nothing. You pay the operator for the pumping work at the price they quote you. This site is a quote and matching service, and your request goes to one local operator, not a lead auction.

Who actually does the pumping?

An independent local operator, not this website. We route your request and they quote, schedule, and perform the work under their own terms, licenses, and insurance.

Related services and cities

Boom Pumps

A boom pump is a truck with a hydraulic arm that places concrete over, around, and far past whatever is in the...

Request a pumping quote

Need line pumps? Tell us about the pour once and a local operator will price it and confirm the schedule.

  • No cost, no obligation
  • Your details go to one local operator, not a lead auction
  • Residential and commercial pours welcome

Get a free quote